Wind Turbine Generator

Wind Turbine Generator
Wind Turbine Generator
Price And Quantity
  • 1
  • Piece/Pieces
    Product Description

    High Speed Double-Fed Wind Turbine Generator

    Customized Products and Service

    SANY 2.0MW wind turbine generator is custom-designed to meet your business needs and provides you with the integrated solutions covering site selection, wind assessment, construction, equipment installation and operation of wind farms.

    High Productivity

    Optimal CP Operation Technology

    The optimal CP operation technology greatly increases the turbine's speed regulating range, thus the turbine can run with optimal capacity before reaching the rated power. This significantly improves the power curve, power generation capacity and reduces the cut-in speed and rated wind speed.

    Low Wind Speed Design

    Applying to the condition when the annual average wind speed is lower than 5m/s; reducing cut-in wind speed; and increasing generating capability of low speed wind period

    Hydraulic Yaw Technology

    SANY patented real-time yaw can realize precise orientation, capture maximal wind power, and real-time cast loose, and avoid stranded cable.

    Wide Adaptability

    Good Grid Adaptability

    By magnetizing the rotor side of the double-fed wind turbine generator, the stator side of the wind turbine SE11520 can output the same voltage and current as the frequency and phase of power grid voltage and carrying out independent active and reactive decoupling control according to requirement.

    Converter/Main Control System

    By improving the control algorithm, WTG can automatically adjust the power and rotation speed relationship based on environmental changes (such as air density, temperature and humidity) to increase full-power rectification at a low wind speed and generation.

    High Reliability

    Low Voltage Ride through Capability

    The low voltage ride through test and other certifications guarantee that the turbine can respond rapidly during the reduction of voltage, generate the dynamic reactive power to support the recovery of grid voltage, and the active power is recovered rapidly after clearing the fault.

    Overload Avoidance Technology

    Based on the load condition of each part of turbine, the operating state can be controlled to avoid operation at its component's limit thus to protect the wind turbine from damage.

    Low Cost

    Self-climbing Cranes

    This innovative design can realize hoisting and installing of tower, cabin, wind wheel and other large components without using large crawler cranes, helping you save abundant construction time and cost.

    Operation and Maintenance Service

    SANY makes the "1-2-3-15" service commitment: reply in 1 quarter hour, arrive on site in 2 hours, problem solved in 3 days and serious faults solved in 15 days.

    Blade model


    Blade length

    56.5 m

    Blade rated speed

    13.1 rpm

    Gearbox model


    Gearbox ratio


    Gearbox rated power

    2.0 MW

    Converter model


    Converter rated power

    2.5 MW

    Generator model


    Generator rated speed

    1800 rpm

    Rotor diameter

    115 m

    Swept area

    10450 m2

    Rated wind speed

    9.5 m/s

    Cut-in wind speed

    2.5 m/s

    Cut-out wind speed

    22 m/s

    Hub height

    80/85/90 m

    Rotor weight

    62 t

    Nacelle weight

    79 t

    Trade Information
    • Days after Acceptance (DA), Delivery Point (DP), Letter of Credit (L/C), Telegraphic Transfer (T/T), Western Union
    • 7-20 Days
    • Yes
    • Contact us for information regarding our sample policy
    • Flat Rack Container, Fixing Product ON FR, Lifting Machine On Board, RORO Shipment
    • Asia, Australia, Central America, North America, South America, Eastern Europe, Western Europe, Middle East, Africa
    • All India
    • CE, ISO, Gost, EPA(USA), CCC
      Contact Us

      SANY Industrial Park, Economic and Technological Development Zone, Changsha, Hunan, 410000, China
      Phone :86-731-85835199/84038934